Medical Endoscope

EN781F IMX662 SDI Camera Module

This SDI camera is equipped with Sony’s latest STARVIS 2 COMS sensor IMX662.With EN781F ISP supports up to 1080P 60FPS high quality and reliable video signal.
And support SDI HDMI interface output at the same time, can meet a variety of different application scenarios.

1.1/2.8′ 2.4M SONY STARVIS 2 CMOS
2. Resolution.
1080P_30/60FPS
3. Support HDMI and SDI output at the same time.
4. Low illumination
5. Wide Dynamic
6. Support electronic amplification, frame accumulation function
7. 2D, 3D noise reduction
8. Fog transmission function
9. Privacy masking function
10. Support one-key white balance
11. Support one-key screen freeze
12. Support external GPIO control FREEZE
Support external GPIO to control FREEZE and one-key white balance. 13.
13. The menu interface can be customized according to customer’s requirements. 14.
14. support UART/RS485 communication protocol, control
Menu and internal registers

EN781F IMX662 SDI Camera Module Overview:

IMX662 CMOS Sensor ：2014(H)×1196(V) total pixels
1965(H) ×1113 (V) effective pixels
Video output:
Hd 1080P HDMI HD 1080P SDI
SNR: ≥50dB(AGC OFF)
Minimum illumination: Color: 0.001Lux@(F1.2, AGC ON) Black and white: 0.0001Lux@(F1.2, AGC ON)
Day and night switch: automatic, color, black and white, external control
White Balance: Automatic/one-click white balance White balance
Noise reduction: 2D+3D noise reduction
Wide dynamic: Off/on
Fog penetration: Off/on
IRIS: Automatic, manual
Privacy Shield: Off/On (16 zones)
Transfer detection: Off/On (4 zones)
Highlight Compensation: Support
RS485/UART communication: Support RS485 communication or UART, control the internal register
Operating temperature and humidity: -30℃~+70℃, humidity less than 95%(no condensation)
Storage temperature: -20℃~+85℃
Power supply: DC12V±10%
Power consumption: 1.5W MAX

IMX662 SDI Camera PIN Out ：

微信图片 20240821191246 EN781F IMX662 SDI Camera Module

What can we do for SDI camera customization ?

1: Based on Sony’s latest Starvis 2 Sensor, we provide hardware and software customization.
2：Menu interface can be customized according to requirements.
3: Support customized UART/RS485 communication protocol to control menu and internal registers.
5: Rich CS lenses are optional.