OCHFA10 Medical Endoscope Camera USB Becoding Board Description：
Aielite introduces the new OMNIVISON OCHFA10 medical endoscope. Available in the following sizes: 1.52mm without LED and steel tube, 1.8mm with steel tube and 4LEDs. Tube lengths can be customized and cable lengths up to 2.5M are supported.
- Sensor ：OMNIVISON’s OCHFA10
- Maximum Resolution ：720 (H) x 720 (V)
- Mega Pixels ：0.52 MP
- Shutter type ：Rolling shutter
- Output data format： MJPG/YUY2
- Camera control：brightness, contrast, hue, saturation, sharpness, gamma,white balance, backlight contrast, flip, gain, exposure time
- White balance： Auto/Manual
- Exposure： Auto/Manual
- Gain ：Auto/Manual
- Power requirements： DC 5.0V
- Operating current： ≤ 90 mA
- Storage temperature： -40~80 ℃/0~90RH
- Storage temperature： -25℃~80℃
- Drivers standard ：UVC driver free international standard
- Interface ：USB 2.0 Type C
- Transfer rates ：480Mb bps
- Picture format ：JPG/BMP, etc
- Video format ：AVI/ASF, etc
- PID/VID/MIC/OTG/API/SDK： Support (Provide customized services)
Frame rates：
- MJPG:
- 720 x 720 @ 30 fps
- 400 x 400 @ 30 fps
Pin description：
- Pin1: VOUT
- Pin2: VDD
- Pin3: GND
- Pin4: CLK
- Pin5: LED+
GPIO Interface：
- GPIO7: Photograph/Video
- GPIO 8: Freeze Image
- GPIO9: White Balance
- IO_DLK: General Purpose Input and Output
- System Compatibility: Windows 7/8/Win10/seven/Mac Android, Linux and embedded operating systems
- Temperature Width Level: Industrial level
OCHFA10 Endoscope Camera Module Structural drawing
What can we do for medical endoscope project?
1: Endoscope front diameter, decoder board size, cable length, material. All can be customized according to the demand.
2：Support to realize special functions such as one-key photo, one-key video, one-key white balance, one-key frame image on software or hardware.
3：Support dimming function, such as 1~10 levels (such as three, six, eight and ten levels, etc.).
4: Support adding MUC SOC chip to realize special function requirements, such as edge computing, medical image analysis.
5: Provide sensor image optimization and debugging services to optimize and upgrade for different application scenarios and requirements. For example, applied to medical endoscopy, industrial endoscopy and animal endoscopy.
6: Support impedance matching (0~500Ω) at the cable end of the endoscope module to improve the vertical streak problem.
7: Design relevant PCBs according to medical certification standards in different countries and regions.
